RC10wp Fan Speed Controller and Blower Speed Controllers manufactured Solid State by Powerform Electric Controls in Sydney Australia

REMOTE CONTROL POTENTIOMETER FOR FAN SPEED CONTROLLER MSR2000A

The RC-10-WP controllers provide manual, remote control for the Powerform Fan Speed Controller model MSR2000A Size 35H x 51W x 34D

CONFIGURATION AND FUNCTION

RC-10

The basic potentiometer which may be panel mounted via the 10mm diameter bush and nut, or with a right angle bracket. The RC-10 provides stepless speed adjustment between maximum and minimum speeds, where the minimum speed is set by the trim potentiometer on the MSR1200B and on the MSR2000A.

RC-10-WP

The RC-10 is mounted on a standard 2 gang HPM switch plate, together with a switch mechanism and control knob.

This configuration permits flush mounting on a wall, or mounting in a HPM standard surface mounting block.

These diagrams indicate how the RC10-WP controller may be installed

Postal address: P.O. Box 445, St Leonards, NSW 1590, Australia
Street address: 3/24 Holdsworth Ave, St Leonards, Sydney, NSW 2065, Australia

Telephone: +61 2 9460 8881
Fax: +61 2 9460 8819

Email: sales@powerform.com.au

web by chisel