about us

products
technical
contact us
 
 
 
 
 
 

 
SOLID STATE FAN SPEED CONTROLLER


The MSC1200B controller provides stepless electronic speed control of single phase motors in fan and pump applications. Speed may be varied manually between an adjustable minimum and the maximum motor speed. Case dimensions: 53W x 37H x 41D.

 
SPECIFICATIONS
RATING


240 volt, 5 amp, 50/60Hz, 1200 VA up to 30 degrees C in free air. Derate at 30VA per degree C above 30 degrees C. Maximum controller case temperature 70 degrees C.

 
MINIMUM SPEED SETTING


Screwdriver adjustment over a wide range of motor speed.

 
MOUNTING


10mm diameter aluminium bush for panel mounting.
Alternatively, refer to MSC1200-WP for mounting on a HPM switch plate with switch mechanism.

 
CONNECTIONS


Two 130mm leads, 24/020 250 volt V105 PVC.

 
SHAFT


6mm plastic, 12mm beyond bush

 

ELECTROMAGNETIC COMPATIBILITY


This controller is fitted with an Electromagnetic Interference suppression network, and complies with the requirements of AS/NZS1044:1995 when correctly installed. See data sheet for installation requirements.

 
These diagrams indicate how the MSC1200B controller may be installed
SMALL MOTOR


LARGE PSC MOTOR
Postal address: P.O. Box 445, St Leonards, NSW 1590, Australia
Street address: 3/24 Holdsworth Ave, St Leonards, Sydney, NSW 2065, Australia

Telephone: +61 2 9460 8881
Fax: +61 2 9460 8819

 
 
Copyright © 2005-2011 Powerform Controls